Questions? Comments? Email us at...
info@wholesalepumpsdirect.com

Myers MW50-21P - 1/2 HP 230V Sewage Pump w/ Piggy Back Float Switch

  • Enclosed design for high-efficiency pumping
  • Eliminates possibility of jamming between impeller and volute
  • Passes full 2” solids
  • Original performance can be restored if wear occurs by replacing volute seal ring
Myers MW50-21P - 1/2 HP 230V Sewage Pump w/ Piggy Back Float Switch - MW50-21P
Myers MW50-21P - 1/2 HP 230V Sewage Pump w/ Piggy Back Float Switch - MW50-21P
Item #: MW50-21P
Availability: Ships From Manufacturer
Usually ships In 1-2 Business Days
Retail: $938.00
Price: $562.80

You Save: $375.20 (40.0%)




    Quantity:

    Myers MW50-21P - 1/2 HP 230V Sewage Pump w/ Piggy Back Float Switch

    The Myers MW50 series sewage pumps are constructed of the most durable combination of materials to withstand the harshest sewage environments. The non-clog impeller can pass up to 2” solids. Provides the flow and head required residential and light commercial applications. Models available for manual operation with external controls, or automatic operation with tethered, piggyback mechanical float switch.


    • Enclosed design for high-efficiency pumping
    • Eliminates possibility of jamming between impeller and volute
    • Passes full 2” solids
    • Original performance can be restored if wear occurs by replacing volute seal ring
    • Oil-filled motor for maximum heat dissipation and continuous bearing lubrication
    • High-torque, permanent split capacitor (PSC) motors; no starting switches or relays to wear out
    • Field-tested, wide-angle, mercury-free piggyback mechanical float switch provides maximum drawdown (automatic models only)
    • Long, flexible type 6 seal provides high-pressure sealing with improved seal face protection by location
    • Lower ball bearing eliminates sleeve bearing wear and significantly reduces motor wear
    • Low-amp draw from the efficient PSC motor means less heat build-up

    Myers MW50-21P - 1/2 HP 230V Sewage Pump w/ Piggy Back Float Switch

    BODY CONSTRUCTION: Class 30 Cast Iron

    HORSEPOWER: 1/2 HP

    MAXIMUM HEAD: 27'

    MAXIMUM CAPACITY: 135 GPM

    FLOW at 10' LIFT: 130 GPM

    SWITCH TYPE: Wide-Angle Mercury-Free Piggyback Mechanical Float

    MINIMUM SUMP DIAMETER: Simplex: 24" Duplex: 36"

    DISCHARGE PIPE SIZE: 2" NPT

    MAXIMUM SOLIDS HANDLING SIZE: 2"

    AMP DRAW (full load): 4.5 Amps on 230v / 9 Amps on 115v

    CORD LENGTH: 20' (16/3 SJTW)

    VOLTAGE: Available in 230v 1-phase or 115v, 60 Hz

    MAX INTERMITTENT LIQUID TEMP: 140 degrees F (60 deg C)