Questions? Comments? Email us at...
info@wholesalepumpsdirect.com

Myers ME750120T - 1/2 HP Effluent Pump w/ 2" Discharge and Wide Angle Piggy Back Float

  • Bearing and Mechanical Seal – Permanently lubricated for long life.
  • Overload Protection – Built-in thermal overload with automatic reset.
  • Cord Design – Prevents oil loss from and moisture protection for motor.
  • Serviceability – Heavy-duty lift-out ring, field serviceable.
Myers ME750120T - 1/2 HP Effluent Pump w/ 2" Discharge and Wide Angle Piggy Back Float - ME750120T
Myers ME750120T - 1/2 HP Effluent Pump w/ 2" Discharge and Wide Angle Piggy Back Float - ME750120T
Item #: ME750120T
Availability: Ships From Manufacturer
Usually ships In 1-2 Business Days
Retail: $1,113.00
Price: $667.80

You Save: $445.20 (40.0%)




    Quantity:

    Myers ME750120T - 1/2 HP Effluent Pump w/ 2" Discharge and Wide Angle Piggy Back Float

    • Bearing and Mechanical Seal – Permanently lubricated for long life.
    • Overload Protection – Built-in thermal overload with automatic reset.
    • Cord Design – Prevents oil loss from and moisture protection for motor.
    • Serviceability – Heavy-duty lift-out ring, field serviceable.
    • Solids Handling – 3/4” spherical capability.
    • Stainless Steel Hardware – Allows for easy disassembly after extended service.
    • Controls – Standard controls available for automatic operation.
    • Float – Mechanical (non mercury).

    Myers ME750120T - 1/2 HP Effluent Pump w/ 2" Discharge and Wide Angle Piggy Back Float

    Applications: Effluent and Wastewater Removal, Sump Drainage, Dewatering, Flood Control

    Capacities: 110 GPM 416 LPM

    Shut-off head: 58’ 17.7 m

    Operation: Tethered: On: 18” 459.7 mm | Off: 9” 231.1 mm

    Solids handling: 3/4” 19 mm

    Intermittent liquid temp: 130°F 54.4°C

    Motor: 1/2 HP, 3450 RPM, 115 Volt or 230 Volt, single-phase, 60 Hz. Oil-filled. Built-in thermal overload protection with automatic reset and permanent split capacitor.

    Acceptable pH range: 6-9

    Shaft seal: Type 6A or equal, Buna-N elastomers, silicon carbide sealing faces, stainless steel metal parts

    Motor housing: Cast iron

    Volute case: Cast iron

    Impeller: Cast iron Vortex

    Power cord: 20’ oil and water resistant 16-3 SJTW-A/SJTW with integrally grounded three-prong plug.

    Discharge, NPT: 2”