Questions? Comments? Email us at...
info@wholesalepumpsdirect.com
Home >

BlissLights Perma Bright L-Series Outdoor Laser Projector - Green

  • Class 2M Laser
  • Metal Housing
  • 5 Year Warranty
BlissLights Perma Bright L-Series Outdoor Laser Projector - Green - 75030
BlissLights Perma Bright L-Series Outdoor Laser Projector - Green - 75030
BlissLights Perma Bright L-Series Outdoor Laser Projector - Green - 75030
BlissLights Perma Bright L-Series Outdoor Laser Projector - Green - 75030
Item #: 75030
Availability: In Stock
Usually ships In 1-2 Business Days
Retail: $343.00
Price: $199.00

You Save: $144.00 (42.0%)




    In Stock Quantity: 4
    Quantity:

    BlissLights Perma Bright L-Series Outdoor Laser Projector - Green

    The Perma Bright L-Series Laser Light is a unique outdoor light fixture that uses holographic technology to project thousands of pin-points of light, creating a firefly effect. Use as an accent in a 12V landscape lighting system or in a holiday display to create a mesmerizing ambiance!

    • Cutting edge holographic technology creates superior luminous light projection for a stunning effect
    • For outdoor use in low voltage landscape lighting and holiday displays
    • Available in three colors (Red-LR, Blue-LB, Green-LG)
    • Metal housing is resistant to harsh outdoor elements
    • Two installation options: power supply or landscape lighting system cable
    • Class 2M German made laser
    • 50’ x 50’ projection coverage
    • Temperature Rating: -40°F to 90°F
    • 6 hours on and 18 hours off automatic timer built into light fixture
    • Remote control included (power on/off, flash, blink, fade and twinkle)
    • Five year limited warranty

    The Perma Bright laser comes with an optional power supply, which allows you to plug the light directly into a GFCI outlet. You also may use the landscape lighting system cable to wire your Perma Bright laser into a landscape lighting system. Please choose the set of instructions below that applies to your application.

    OPTION 1: INSTALL USING INCLUDED POWER SUPPLY

    1.Attach the stake to the Perma Bright fixture head by twisting the stake clockwise.

    2.Connect the Perma Bright fixture to the provided 10’ extension cord, then connect the 10’ extension cord to the provided power supply.

    3.Connect the power supply to an available GFCI electrical outlet.

    4.Place the light into the desired location.

    5. Loosen the thumb screw on the side of the fixture and adjust the angle of the projected light. Retighten thumb screw.

    6.Use the included remote control to change the settings of the light output.

    7.To turn off the light, use the provided remote control or remove the power plug from the GFCI electrical outlet.

    OPTION 2: INSTALL AS PART OF A 12V LANDSCAPE LIGHTING SYSTEM Important: Turn off power before installing light.

    1.Attach the stake to the Perma Bright fixture head by twisting the stake clockwise.

    2.Connect the Perma Bright fixture to the provided landscape lighting cable.

    3.Place the light into the desired location.

    4.Using the landscape lighting cable on fixture, splice into previously installed (or new) landscape lighting wire (using instructions 5-9 below).

    5. Strip #22-#16 wires 1/2” (12.7mm) and #14-#8 wires 7/16” (11.11mm).

    6.Align any frayed strands or conductors.

    7.Pre-twisting is unnecessary. Position stripped wires together with ends of insulation even.

    8.Twist the included DryConn Waterproof Connectors onto wires, pushing firmly until hand tight. Do not over torque.

    9.Wipe sealant in and around conductors and connector opening while tightening.

    10.Loosen the thumb screw on the side of the fixture and adjust the angle of the projected light. Retighten thumb screw.

    11.Use the included remote control to change the settings of the light output.