CT-2010 - Lancaster ONE Water Filter Dual Gradient 20 - 10 Micron
The Orange Filtration Series are dual gradient double pleated filtration solutions for extended life and use, with filtration levels of 5, 10 and 20 microns. The filters are designed with a larger pre-filtration layer externally and the smaller internally, extending filtration level contamination and service life, while achieving high flow and low pressure drop.
The filters will outperform competitive filtration solutions in all turbidity applications including silt, rust, and other particle filtration. The Orange Series also provides lower shear water velocity as the raw water passes through the filter, allowing for more contact time and interaction with the extensive surface area of the filters. This results in higher water quality and longer life of the filtration system. Each filter comes with a unique handle designed top cap for lightweight and easy removal, a bag for proper disposal, and a double o-ring bottom connection into the Cartridge Tank® plumbing adapter for the 2½” assembly and full 1¼” PVC glue socket flow rate connections.
Extended Service Life…6, 12, 18, or 24 months, versus 1-3?: The total surface area of the dual gradient Orange Series is approximately 100 ft2, as compared to a typical single layer 2 ½”x20 filter, is approximately 7ft2 of filter media area, and a 4 ½”x20 is approximately 16ft2. We have nearly 6.5x open area compared to standard 4.5x20 filters…100ft2 vs. 16ft2 and nearly 14.5x open area compared to standard 2.5x20filters…100ft2 vs. 7ft2. Extended Service Life!
Say good bye to small and inefficien thousings. Get rid of expensive stainless steel housings. The Cartridge Tank is a direct replacement for small and inefficient 2½” or 4½” housings, or expensive Stainless Steel cartridge housings, and offers extended service and life, and a more cost effective and efficient filtration solution. Utilizing industry exclusive liner design and no-tools necessary snap-ring design; Full radial seal top and bottom caps make replacement simple. Cartridge Tank makes it easy to access and remove the internal filtration solution. Light weight and cost effective with multiple configuration options, from high flow commercial / industrial applications to stand-alone residential Point of-Entry (POE) installations for city and well water applications, this is the filtration solution of the future…100% non-metallic! The Cartridge Tank is a high performance, NSF42 listed device and has been tested to 100 psi operating pressure with 4:1 Burst Safety Factor.
- Ideal for Residential, Food Service, Rental Fleets, Commercial and Industrial Applications
- Make-up Water, RO Pre-filtration, Cooling Towers, Chill Water Loops, Metal Finishing
Process Water (turbidity, particulate, colloidal suspensions)
- Reduction of unwanted bad taste and odor from potable drinking water
City water applications where water softeners are a hard sell…as a replacement option of
pitcher, faucet, bottled water and/or refrigerator filters
- Reduction in frequency of replacing common 2½” or 4½” housings…Bigger is Better
- Other water-based fluid solutions