Call or Text us at: (848) 231-9424


The 3M™ Aqua-Pure™ 3MFF100 Full Flow Drinking Water System helps reduce chlorine taste & odor from your drinking, cooking and cleaning water. Filter changes are quick and easy - twist on, twist off, no mess.

The 3M™ Aqua-Pure™ AP900 Series whole house filtration systems contain high performing, multitasking filters that help reduce contaminants such as sediment, chlorine taste and odor and now even scale. These systems are easy to install, maintain and change out.

The 3M™ Aqua-Pure™ AP801 and AP 802 Plastic Whole House Water Filtration System reduces sediment and other contaminants (cartridge dependent) to help provide cleaner, clearer water from the water used throughout your entire home.

The 3M™ Aqua-Pure™ AP101T and AP102T Whole House Water Filtration System reduces sediment or chlorine taste and odor (cartridge dependent) to help provide cleaner, clearer water by filtering out sediment and other contaminants from the water used throughout your entire home.

The line of 3M Aqua-Pure™ Water Filter Systems is an ideal whole-house water-filtration system for larger homes and commercial buildings. It reduces particulate, rust, and the taste and odor of chlorine, improving the quality of cloudy, colored or musty water. By improving the clarity, taste, and odor of tap water, it provides an economical alternative to bottled drinking water. The filter system provides a heavy flow rate and is simple to install.

The whole house water filter system, manufactured by 3M Purification Inc., formerly CUNO Incorporated, is for larger homes and commercial applications. Installed at point-of-entry, the water-filtration system has a single vessel design with 1-inch inlet and outlet ports. All parts are manufactured from FDA CFR-21 compliant materials. The system provides a flow rate of 20 gallons (75.7 liters) per minute. It operates at water pressures up to 100 psi (690 kPa) and operating temperatures up to 100°F (37.8°C). A pressure relief button is incorporated into the system for ease in cartridge replacement. 3M recommends replacement of the filter cartridge every six months at a minimum and regularly scheduled maintenance in order for the product to perform as advertised. The disposable filter cartridge must be replaced sooner than six months if a noticeable reduction in flow rate occurs. It should not be used with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Whole-house water treatment systems, sometimes referred to as point-of-entry (POE) systems, are installed immediately after the water meter or well pump. A whole-house filter that reduces iron, particulate, and chlorine odor and taste will typically treat all water entering a residence, help protect plumbing and fixtures from rust buildup and discoloration while providing more appealing drinking water. If a water treatment system includes a water softener, a cold drinking water line may bypass the water softener to provide salt-free drinking water. Regular maintenance for a whole-house system may be as simple as replacing a filtration cartridge every six months, or may require a service call. The initial expense of filtration often pays off in the long term as it protects pipes and fixtures while reducing or eliminating bottled water purchase