The Tank Alert® AB indoor alarm system features auto reset and battery backup features. This alarm monitors liquid levels in lift pump stations, sump pump basins, holding tanks, sewage, agricutural, and other water applications.
The alarm horn sounds when a potentially threatening liquid level condition occurs. The horn can be turned off, but the alarm light remains on until the condition is remedied. Once the condition is cleared, the alarm will automatically reset. A green power on light indicates 120 VAC primary power to the alarm. Low battery chirp feature indicates when battery should be replaced. UL Listed and CSA Certified
Manufacturer: SJE Rhombus
Model: TA AB-01H
VOLTAGE FOR 120 VAC MODEL: Primary, 120 VAC, 60 Hz, 2.4 watts max. (alarm condition). Secondary, 9 VDC
BATTERY BACKUP POWER: 9 VDC
ALARM ENCLOSURE: 6 x 4 x 2.25 inch (15.24 x 10.16 x 5.71 cm), NEMA 1 plastic.
ALARM HORN: 87 decibels at 10 feet (3 meters)
POWER CORD: 6 foot (1.8 meter)
FLOAT SWITCH CONNECTION TERMINAL: For float switch connection only. Do not apply power. (Voltage across terminals is 8-9 VDC).
FLOAT SWITCH: SJE SignalMaster® control switch with mounting clamp
Cable: 15 feet (4.57 meters), flexible 18 gauge, 2 conductor (UL) SJOW, waterresistant (CPE)
Float: 2.74 inch diameter x 4.83 inch long (7.0 cm x 12.3 cm), high impact, corrosion resistant polypropylene housing for use in sewage and water up to 140oF (60oC)
Literature: SJE Rhombus Tank Alert Sell Sheet, SJE Rhombus Tank Alert Owners Manual